THANK YOU FOR YOUR INTERNAL REQUEST
POWDER TRANSFER OPTIONS
In pharmaceutical manufacturing, applications that use a continuous process allow for transfer through containment.
It is important for Flow Sciences to understand during the engineering and planning phase where the hazardous material is coming from and how it is entering the containment system, as well as how it is exiting and where it is going.
Localized Containment for Process Equipment
Providing Containment for the hazardous area rather than using a large cleanroom or respirator program allows for more consistent and higher performance containment with lower energy and operating costs. In many applications, this allows for weighing or dispensing to happen in the same unit, saving valuable lab space and transfer time.
Containment System to Containment System
Transfer Option into Containment System
Containment System to Transfer Option
Containment System to Waste Disposal
4” Sanitary Fitting through the Base of the Containment System
8” Sanitary Fitting through the Sidewall
of the Containment System
Both 4” and 8” Sanitary Fittings
FSI’s continuous liner is an 8 or 12-inch stainless steel port designed for bottles, IBCs, or large quantities of waste disposal while keeping an ongoing process under containment.
This eliminates cross contamination of powders, protecting the personnel as well as the product. The continuous liner kit functions much like a bag-in/bag-out filter change-out, in that waste or used materials are placed through the port into a 25’ bag, tied and taped off, then cut free and removed from the enclosure.
Using correct procedure, the next section of liner will be clean and ready for use during the next cycle.
