HPAPI Package Inspection Suite designed to provide personnel and product protection down to a respiratory exposure
of at least 100 micrograms per cubic meter air (100 ug/m3) package inspection operations involving (or involving the risk of)
manipulation of Highly Potent Pharmaceutical Ingredients (HPAPI), such as fentanyl.
Containment is provided in the event that package has been damaged, disturbing toxic contaminants.

The rightmost enclosure accommodates space for lifting packages into the suite while retaining containment
with a Dual-HEPA fan/filter housing with bag-in-bag-out (BIBO) filter replacement system.
An FS6551 330-lb. capacity stainless steel lift cart is included to facilitate loading of product
through a 12” diameter cutout Overhead LED lighting facilitates optimal viewing of loaded packages.

If the operator is required to inspect the package further, they may move the package to the left-side enclosure,
which features a 57.75” work surface. (2x) Dual-HEPA fan/filter housings with BIBO filter replacement system
retain containment on this side of the enclosure suite. An acrylic divider is included to prevent cross-contamination
or to isolate the work spaces of each enclosure, creating two separately contained work areas.
Conversely, the divider may be removed to yield a total width of 100” [2533mm].

Suite includes a 60” (W) mild-steel, powder-coated table with bolt-down locking system.
Table features leveling pads for stability of product and reproducibility
of analytical mass measurements to 6 decimal places (1 x 10-6 grams).

Additional features include:

  • Hinged door with acrylic viewing panel on right-side enclosure
  • FS2070 Waste Chute for safe disposal of waste
  • Integrated airflow alarm to alert the user when face velocity is below the setpoint calibrated by the certifier

External Width: 99.74”
External Depth: 38.44”
Internal Height: 26.51”

FSI Category 10+

  • What is being done inside of the enclosure? What type of material (powder, liquid, gas, nuisance odor) is being worked with? How does the material enter and exit the enclosure system? etc...
  • What type of filtration is required? Single HEPA, Dual HEPA, Carbon, House Exhaust, etc... What is the required OEL (Occupational Exposure Limit) for the process, or any other details about containment goals? What is the quantity of powder or liquid, task duration, composition of powder, etc...?
  • What equipment is being worked with? What is the equipment model, size, scope, function, and any other information that will affect the design of the enclosure, including movement, heat output, etc...? *State the specific equipment make and model if available*
  • Drop files here or
    • Are there any additional notes or information that should be considered? Are there any special design requirements?