Integrated Glovebox and Hybrid Isolator for HPAPI Processing


Integrated Glovebox and Hybrid Isolator for HPAPI Processing designed to provide personnel protection while working with powder substances.

The glovebox (right side of the system) features include polypropylene superstructure, right side pass through port, acrylic viewing panels, front door with gas springs, thimble, magnahelic pressure gauge, minihelic pressure gauge, FS1650 velocity alarm, go/no go red and green signal light, LED lighting, 4x 10” oval glove ports, top mount fan with bag-in/bag-out 99.99% heap filters, and a custom stainless steel table. Acrylic viewing panels and LED lighting maximize lighting across the workspace.

The Hybrid Isolator (left side of the system shown without glove draft shield) features and acrylic superstructure, right side pass through, acrylic viewing panels, thimble, LED lighting, removable draftshield with 8” oval glove ports, integrated alarm, minihelic gauge, black phenolic base, and top mount fan with bag-in/bag-out dual heap filters, 2x continuous liner ports, and a stainless steel table. Acrylic viewing panels and LED lighting maximize lighting across the workspace.

Enclosure Dimensions:

128” Exterior Width

32” Exterior Depth

24” Interior Height

  FSI Category: 10+

  • What is being done inside of the enclosure? What type of material (powder, liquid, gas, nuisance odor) is being worked with? How does the material enter and exit the enclosure system? etc...
  • What type of filtration is required? Single HEPA, Dual HEPA, Carbon, House Exhaust, etc... What is the required OEL (Occupational Exposure Limit) for the process, or any other details about containment goals? What is the quantity of powder or liquid, task duration, composition of powder, etc...?
  • What equipment is being worked with? What is the equipment model, size, scope, function, and any other information that will affect the design of the enclosure, including movement, heat output, etc...? *State the specific equipment make and model if available*
  • Drop files here or
  • Are there any additional notes or information that should be considered? Are there any special design requirements?

 

CLICK HERE TO SEE THE STANDARD PRODUCT INFORMATION


LFBC™ Lateral Flow Bio Containment Isolator for HPAPI Processing

• Designed for working with HPAPI, ADCs, Oncology, and more
• HEPA inlet filter for internal ISO 5 or better interior
• Surrogate Powder Testing Below 30 ng/m3
• Polypropylene Frame with Acrylic or Glass Panels

 

 

CLICK HERE TO SEE STANDARD PRODUCT INFORMATION

 

Hybrid Isolator

Dual Purpose Contained Vented Enclosure

• Removable Glove Panel for Multiple Processes Applications
• Two-Speed Fan Adjusts Face Opening Air Velocity
• Surrogate Powder Testing Below 50 ng/m3
• Polypropylene Frame with Acrylic or Glass Panels

 2025 Mercantile Dr., Leland, NC 28451
 Phone: 1-800-849-3429
 Fax: (910) 763-1220

© 2019 Flow Sciences, Inc. All rights reserved

 2025 Mercantile Dr., Leland, NC 28451
 Phone: 1-800-849-3429
 Fax: (910) 763-1220

© 2019 Flow Sciences, Inc. All rights reserved

Privacy Preference Center