Enclosure designed to provide personnel protection down to a respiratory exposure concentration of 1000-5000 ug/m3. Features (3x) 8” oval glove ports on removable draftshield on front of unit. Upon removal/replacement of the glove panel, the top – mounted fan / filter housing automatically adjusts volumetric flow rate (fan speed) to the corresponding setting calibrated by the certifier. 8” continuous liner on right side facilitates easy execution of waste removal procedure and easy preparation for the next iteration.

Fan / Filter housing features Dual-HEPA filtration with Bag – In / Bag – Out (BIBO) filter replacement which contains the filter within a hazard bag to allow safe removal and replacement with new filter.

Additional features include:

  • Integrated 1650 alarm which alerts the user when face velocity is below the setpoint calibrated by the certifier
  • LED lighting with switch
  • 6” exhaust port on top of unit; connects to house exhaust when thimble connection is used (sold separately)
  • 1.5” diameter iris port on each side to allow entry and egress of electrical / equipment


External Width: 47.75”
External Depth: 30”
Internal Height: 24.28”

FSI Category 5-6

  • What is being done inside of the enclosure? What type of material (powder, liquid, gas, nuisance odor) is being worked with? How does the material enter and exit the enclosure system? etc...
  • What type of filtration is required? Single HEPA, Dual HEPA, Carbon, House Exhaust, etc... What is the required OEL (Occupational Exposure Limit) for the process, or any other details about containment goals? What is the quantity of powder or liquid, task duration, composition of powder, etc...?
  • What equipment is being worked with? What is the equipment model, size, scope, function, and any other information that will affect the design of the enclosure, including movement, heat output, etc...? *State the specific equipment make and model if available*
  • Drop files here or
  • Are there any additional notes or information that should be considered? Are there any special design requirements?




Hybrid Isolator

Dual Purpose Contained Vented Enclosure

• Removable Glove Panel for Multiple Processes Applications
• Two-Speed Fan Adjusts Face Opening Air Velocity
• Surrogate Powder Testing Below 50 ng/m3
• Polypropylene Frame with Acrylic or Glass Panels

 2025 Mercantile Dr., Leland, NC 28451
 Phone: 1-800-849-3429
 Fax: (910) 763-1220

© 2019 Flow Sciences, Inc. All rights reserved

 2025 Mercantile Dr., Leland, NC 28451
 Phone: 1-800-849-3429
 Fax: (910) 763-1220

© 2019 Flow Sciences, Inc. All rights reserved

Privacy Preference Center